manualshive.com logo in svg

Panasonic WJ-NX400G-54000T6, Operating Instructions Manual, Page: 194 / 224

Share
Download
Panasonic WJ-NX400G-54000T6 Operating Instructions Manual Download Page 194

194

Setup

Step 1

Click the [Setup] tab.

Step 2

Click the button for the desired menu.

Step 3

Click the button for the desired submenu.

Step 4

Configure each setting item. Click the [Set] button 
after completing the settings.

→

→

The settings will be applied. When moving to 
another page without clicking the [Set] button, the 
configured settings will be canceled.

Important:

• If the settings are applied, other login users will be 

forcibly logged out.

• If the settings relating to the user management are 

applied, all login users will be forcibly logged out.

• Recording may not be performed for around 4 

seconds just after the settings are applied.

Configure the settings

It is possible to configure the settings of the recorder using a web browser.
Refer to page 78 for setup items that can be configured from the web browser and their further information.

Basic operations

[Setup on browser]

Summary of Contents for WJ-NX400G-54000T6

































































































































































































































Reviews:

No comments