58
59
Set up the user level for individual cameras
Select the cameras allowed for operation by each user level (operator/viewer/logged out) by marking the
respective checkboxes.
Remove the check mark from any cameras not to be displayed. The setting for the administrator/manager can-
not be changed.
Register, edit or delete the user information
[User registration]
Use this tab to register, edit or delete user names and passwords.
[Back] button
Click the button after completing the settings. The
screen returns to the [Basic] tab.
■
Register new user
Register user information such as a user name, pass-
word and operation level.
The maximum number of users that can be registered
is 32.
[User name]
Enter the user name using the on-screen keyboard
(
☞
Installation Guide Page 8). The user name must
be between 1-32 characters including the half-width
alphanumeric and the symbol.
[Password]
Enter the user password using the on-screen key-
board (
☞
Installation Guide Page 8). The user name
must be between 8-32 characters including the half-
width alphanumeric and the symbol. Use at least two
types of characters among alphabet, numbers and
symbols. The registered password will be displayed
as "*****" regardless of what is entered.
Important:
• For enhanced security, change the password on a
regular basis.
• If you forget the administrator name and the pass-
word, the recorder must be initialized (repair).
[Setup via recorder's main monitor]
