manualshive.com logo in svg

Panasonic WJ-NX200K, Operating Instructions Manual

The Panasonic WJ-NX200K Installation Manual is a comprehensive guide that enables users to effortlessly set up and optimize their Panasonic WJ-NX200K security system. This user-friendly manual is available for free download on manualshive.com, providing step-by-step instructions for seamless installation and maximized product performance.

Share
Download
background image

58

59

■

 User level settings

Set up the operations allowed at each user level 
(Administrator/Manager/Operator/Viewer) by marking 
the respective checkboxes. To stop a user from oper-
ating certain functions, do not check the respective 
function. The setting for the administrator cannot be 
changed. The system can also be set up to allow only 
live operation (image switching) after logout.

Note:

• Only a user logged in as "Administrator/Manager" 

can change the user level settings.

• At the default, operations allowed at the user level 

are as follows:

Administrator/Manager: Possible to perform all 

the operations (Administrators)

Operator: Possible to perform a part of the set-

tings of the recorder and alarm reset (Head of 
operators)

Viewer: Possible to monitor or play the images 

(Operators)

Restrictable operations

It is possible to allow or restrict the following operations for each user.

Operation

Description

Camera operation

Camera images displayed on the main monitor can be changed.

Camera control

Camera control such as panning and tilting can be performed.

Search and playback

Recorded images can be played back and searched by VMD search.

Copy

Recorded images can be copied to storage media such as a USB.

Alarm reset

An alarm action can be canceled.

Error reset

An error action can be canceled.

Setup

Setup menus can be displayed and the settings can be configured.

Camera image display

The image and audio data of all cameras can be displayed/output. To set 
up the display of camera images, click the [Setup >] button. (

☞

 Set up the 

user level for individual cameras)

* It is recommended to restrict "Setup" to the administrator.
*  Even if "Setup" is set to be available to each user, there will be some operations restricted to the administrator 

only.

 

*  Administrators and managers can perform all 

operations. The difference between an adminis-
trator and a manager is that an administrator 
has priority over a manager; if both perform the 
same operation at the same time, that of the 
administrator will have priority.

• The screenshot shows the default.
• When a user tries to operate a function that is not 

checked (restricted function), the login window 
may sometimes be displayed to prompt a user 
with the required user level to log in.

[Setup via recorder's main monitor]

Summary of Contents for WJ-NX200K













































































































































































































Reviews:

No comments

Related manuals for WJ-NX200K

Cambridge Audio Azur 840C Supplementary Manual preview
Azur 840C
Brand: Cambridge Audio Pages: 5
Ultra Products ULT31860 Specifications preview
ULT31860
Brand: Ultra Products Pages: 1
Panasonic RM-1300A Service Manual preview
RM-1300A
Brand: Panasonic Pages: 29
Panasonic CQ-FX820 Operating Instructions Manual preview
CQ-FX820
Brand: Panasonic Pages: 38
Farenheit DVD-8 Operating Instructions Manual preview
DVD-8
Brand: Farenheit Pages: 30
Onkyo DX-RD511 Instruction Manual preview
DX-RD511
Brand: Onkyo Pages: 32
Radio Shack 14-729 Owner'S Manual preview
14-729
Brand: Radio Shack Pages: 17
Transonic TC2535DVD 5.1 Instruction Manual preview
TC2535DVD 5.1
Brand: Transonic Pages: 18
VDigi BDP-Mini 12 User Manual preview
BDP-Mini 12
Brand: VDigi Pages: 51
Slick MP305-1 User Manual preview
MP305-1
Brand: Slick Pages: 8
MOOD PROFUSION iS Manual preview
PROFUSION iS
Brand: MOOD Pages: 5
Hyundai DV2X212U Instruction Manual preview
DV2X212U
Brand: Hyundai Pages: 104
Rautz SP-702AG Service Manual preview
SP-702AG
Brand: Rautz Pages: 32
Lenox PDVD1300 Instruction Manual preview
PDVD1300
Brand: Lenox Pages: 17
JVC HR-XVC18BUS Instruction Manual preview
HR-XVC18BUS
Brand: JVC Pages: 42
JVC HR-1080-PRO User Manual preview
HR-1080-PRO
Brand: JVC Pages: 36
JVC DLA-HD2KU - D-ila Projector Head Instructions Manual preview
DLA-HD2KU - D-ila Projector Head
Brand: JVC Pages: 40
JVC HR-XVC29SUC Instructions Manual preview
HR-XVC29SUC
Brand: JVC Pages: 76

Brands by name

Popular brands

Load more brands