manualshive.com logo in svg

Panasonic WJ-NX200G, Operating Instructions Manual

The Panasonic WJ-NX200G is a state-of-the-art surveillance system offering advanced security features. Enhance your user experience with the comprehensive Operating Instructions Manual, available for free download at manualshive.com. This manual provides detailed guidance on configuring and utilizing the product's functions, ensuring optimal performance and peace of mind.

Share
Download
background image

64

65

Note:

• HDD information will not be updated while the 

"Maintenance" page is being displayed.

• The recovery progress information is displayed 

next to the HDD operation mode display during 
mirroring recovery.

[Operation mode of HDD]

Operation mode of HDD will be displayed.
Refer to page 72 for further information.

[Capacity]

Displays the capacities of the hard disk drives.

[Operation]

Displays the operating time of the hard disk drives.

[Status]

Displays the statuses of the hard disk drives.

Normal: Hard disk drives that are operating nor-

mally. The number indicates the order of use.

Playback-only: Hard disk drives for playback use 

only (Recording is unavailable.)

Removed: Hard disk drives that are excluded 

from operation due to fault

Error: Hard disk drives that have become faulty 

during the format process

Blank: No HDD connected
Added: HDD cannot be used until it is formatted

[Recorded time range]

Displays the time range of the images recorded on 
the hard disk drives.

[Overwrite cycle]

Calculates and indicates the overwriting cycle of the 
hard disk drives, based on the past recording perfor-
mance (the date & time of the oldest recorded data, 
the current date & time and the capacity of the hard 
disk drive).

Note:

• While overwriting recording is being performed, 

the overwriting cycle will be calculated based on 
the date & time of the oldest recorded data and 
that of the newest recorded data.

• The more often the recording was performed in 

the past, the more accurate the calculation of 
overwriting cycle will be.

• When the recording conditions are changed or 

when data is automatically deleted, the overwrit-
ing cycle will not be indicated accurately.

Confirm the hard disk drive information [HDD information]

Capacity of the hard disk drive and the running time of this product, time range of the recorded images, etc. will 
be displayed.

[Setup via recorder's main monitor]

Summary of Contents for WJ-NX200G













































































































































































































Reviews:

No comments

Related manuals for WJ-NX200G

Korg TONEWORKS DTR-2 Owner'S Manual preview
TONEWORKS DTR-2
Brand: Korg Pages: 5
Pentek 52791 Getting Started Manual preview
52791
Brand: Pentek Pages: 14
Trust 1620W Quick Start Manual preview
1620W
Brand: Trust Pages: 8
Emerson EGT-1 User Manual preview
EGT-1
Brand: Emerson Pages: 1
SABINE ST-1000 Manual preview
ST-1000
Brand: SABINE Pages: 8
Akai AT-2250 Operator'S Manual preview
AT-2250
Brand: Akai Pages: 3
POWERCOLOR RA330 Manual preview
RA330
Brand: POWERCOLOR Pages: 28
Inventronics Accu-Tuner 4 Operating Manual preview
Accu-Tuner 4
Brand: Inventronics Pages: 48
X-Micro TV BAR User Manual preview
TV BAR
Brand: X-Micro Pages: 56
ZITO MEDIA Fire TV Stick 4K Installation Instructions Manual preview
Fire TV Stick 4K
Brand: ZITO MEDIA Pages: 6
MuxLab 500786 User Manual preview
500786
Brand: MuxLab Pages: 18
Rebel KOM1060 Owner'S Manual preview
KOM1060
Brand: Rebel Pages: 13
Polk Audio SR-H1000 User Manual preview
SR-H1000
Brand: Polk Audio Pages: 60
Coby MPCD451 Introduction preview
MPCD451
Brand: Coby Pages: 2

Brands by name

Popular brands

Load more brands