Use this unit only in the manner intended by the manufacturer. If you have any
questions, contact the manufacturer.
Before servicing or cleaning the unit, switch power off at service panel and lock the
service disconnecting means to prevent power from being switched on accidentally.
When the service disconnecting means cannot be locked, securely fasten a
prominent warning device, such as a tag, to the service panel.
Installation work and electrical wiring must be done by qualified person(s) in
accordance with all applicable codes and standards, including fire-rated construction.
When cutting or drilling into a wall or ceiling, do not damage electrical wiring and
other hidden utilities.
The following symbols are used to classify and describe the type of instructions to be
observed.
For Your Safety
To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to
equipment or property, always observe the following safety precautions.
Explanation of symbol word panels
The following symbol word panels are used to classify and describe the level of hazard,
injury, and property damage caused when the denotation is disregarded and improper
use is performed.
GENERAL SAFETY INFORMATION
WARNING
CAUTION
2
English
Denotes a potential hazard that could result in serious
injury or death.
Denotes a hazard that could result in minor injury.
This symbol is used to alert users to a specific operating procedure that must
not be performed.
This symbol is used to alert users not to disassemble the equipment.
This symbol is used to alert users to a specific operating procedure that must be
followed in order to operate the unit safely.
This symbol is used to alert users to make sure of grounding when using the
equipment with the grounding terminal.
WARNING
To reduce the risk of fire, electric shock or injury to persons, observe the following:
Do not install with a method which is not approved in the instructions.
The product must be properly grounded.
Install the unit at least 7.5 ft (2.3 m) above the floor.
Do not disassemble the unit for repair. It may cause fire or electric shock.
ct