Make sure that adaptor claws are properly inserted
into body slots.
IMPORTANT:
5. Insert the fan body into joists. (Fig.9)
6. Open the orifice cover, secure the fan body to
adaptor by using thumb screw. (Fig.10)
7. Plug connector to receptacle. (Fig.11)
When mounting
body and blower
separately
1. Loosen 3 screws (but
do not remove them
from blower). (Fig.12-1)
2. Remove blower section.
(Fig.12-2)
4. Insert fan body (without
blower section) into
joists. (Fig.9)
5. Secure the adaptor and
fan body by using thumb
screw. (Fig.10)
3. Remove adaptor from
fan body and secure it
to joists as in Fig.8 of
page 8.
Fig. 11
Thumb
screw
Plug connector
Receptacle
Fig. 10
Thumb
screw
Orifice cover
Slots
Duct
Adaptor
claws
Fig. 9
Fan body
Fig.12-2
Fan body
Blower
Fig.12-3
Fan body
Joist
Fig.12-1
Adaptor
3-Screws
3-Screws
Fig.12-4
Screw driver
Joist
9
3. Follow step 5 to 7 of the installation (page 7) to
complete the duct work and wiring.
I
4. Insert
to fan body
(refering to step 2 of installation , page 6)
the suspension bracket in
I
7. Insert the blower into the
fan body. (Fig.12-3)
6. Secure the fan body
to joists by using long
screw(M4X30) (Fig.13
of page 10)
8. Secure the blower.
(Fig.12-4) and plug
connector to receptacle
(Fig.11)
Duct tape