2-Long screws(M4X30)
Fig.18
11
Adaptor
Fan body
Joist
Fig.17
Junction box
inches mm
(
)
Fig.16
1. Before installation, open the orifice cover. Secure the fan
body to adaptor by using thumb screw. (Fig.1 of page 6)
4. Secure the suspension bracket to joists by using long
screws(M4X30) (Fig.18, Fig. 19 of page 11)
5. Secure the suspension bracket to the fan body by using
screw (M4X10) (Fig. 19)
II
6. Follow step 5 to 9 of installation (page 7~page 8)
to complete the installation work.
I
3. Insert the fan body between joists.
Make sure the fan body is level and square
(perpendicular)with the joists.(Fig.17)
Keep the distance B (7/8 inch, 21.6mm) for the
thickness of ceiling board.
2. Insert the suspension bracket into the bracket cover of
adaptor side and the back of the fan body. (Fig.16)
(select the suspension bracket according to spacing A
as show below)
A
16 inches and 19.2 inches
horizental joist
19.2 inches vertical joist
A
13 1/4~15 3/4 ( 336~400 )
16 1/2~18 3/4 ( 419~480 )
Suspension bracket
[
Suspension bracket
[
I
III
16 inches and 19.2 inches
horizental joist]
19.2 inches vertical joist]
Suspension bracket
[16 inches and 19.2 inches
horizental joist]
Suspension bracket
[19.2 inches vertical joist]
III
II
Suspension bracket
[16 inches and 19.2 inches
horizental joist]
Suspension bracket
[19.2 inches vertical joist]
II
I
3~5
( 76~126 )
5 4/5~7 4/5 ( 148~198 )
B
7/8 (21.6)
Joist
4-Long screws(M4X30)
2-Screw
(M4X10)
II
Fig.19