manualshive.com logo in svg

Panasonic WH-ADC0309K6E5, Operating Instructions Manual, Page: 43 / 56

Share
Download
Panasonic WH-ADC0309K6E5 Operating Instructions Manual Download Page 43

43

Menu

Default Setting

Setting Options / Display 

 Outdoor temp. for heating OFF

24 °C

Temperature for 

heating OFF

  T for heating ON

5 °C

Set  T for heating 

ON.

* This setting will not 

available to set when 

pump 

fl

 owrate set to 

Max. duty.

 Heater ON/OFF
 Heater ON/OFF   Outdoor temp. for heater ON

0 °C

Temperature for 

heater ON

 Heater ON/OFF   Delay time for heater ON

0:30 min

Delay time for heater 

to turn on

 Heater ON/OFF   Water temperature for heater ON

-4 °C

Setting of water 

temperature to turn 

on from water set 

temperature.

 Heater ON/OFF   Water temperature for heater OFF

-2 °C

Setting of water 

temperature to turn 

off from water set 

temperature.

6.2

 *

1,

 *

2

 Cool

To set various water & ambient 

temperatures for cooling. 

Water temperatures for cooling ON 

and  T for cooling ON.

*

1

The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available).

Summary of Contents for WH-ADC0309K6E5

























































Reviews:

No comments