Panasonic VQT1T63 Operating Instructions Manual Download

Page: 73 / 210

- 73 -

Advanced (Recording pictures)

[REC] mode:

Taking Pictures using Burst Mode

Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.

Press

[

‚

] to display the burst mode selection

menu, and then press

to select the burst

mode.

[

‚

]

button

Press [MENU/SET].

•

You can also press the shutter button halfway to finish.

•

The menu screen disappears after about 5 seconds. At this

time, the selected item is automatically set.

Take a picture.

•

Hold down the shutter button fully to activate the burst mode.

The burst speed is constant regardless of the transfer speed of the card.

•

The burst speed values given above apply when the shutter speed is 1/60 or faster and when

the flash is not activated.

[OFF]

Burst speed (pictures/

second)

—

2.5

approx. 2

Number of

recordable

pictures

—

max. 4

Depends on the

remaining capacity of the

built-in memory/card.

›

—

max. 8

—

max. 3

—

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands