Panasonic VQT1T63 Operating Instructions Manual Download

Page: 71 / 210

- 71 -

Advanced (Recording pictures)

Pressing the shutter button once automatically takes three pictures with aspect ratios of
[4:3], [3:2] and [16:9] (with a single shutter sound).

Press [DISPLAY] to display [MULTI ASPECT] from
the auto bracket.

•

It is switched between auto bracket and multi aspect every time

[DISPLAY] is pressed.

Press

to select [ON].

Press [MENU/SET] to close the menu.

•

You can also press the shutter button halfway to finish.

•

The combinations of picture sizes are as follows.

E.g. If setting is 6.5M (3:2)

•

7M (4:3), 6.5M (3:2) and 6M (16:9).

When the multi aspect option is selected, the number of pixels cannot be set lower than

the above values. If values have been set previously, they are temporarily changed to
the above values.

Multi Aspect

[4:3]

[3:2]

[16:9]

10M

9.5M

6.5M

4.5M

2.5M

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands