Panasonic VQT1T63, Operating Instructions Manual

Page: 62 / 210

Advanced (Recording pictures)
- 62 -
∫ The available flash range to take pictures
•
The available flash range is an approximation.
¢
When the [ISO LIMIT SET] (P109) is set to [AUTO]
•
In [HIGH SENS.] (P90) in scene mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m to approx. 21.2 m
Tele: Approx. 90 cm to approx. 15.1 m
•
In [FLASH BURST] (P91) in scene mode, the ISO sensitivity automatically switches to between
[ISO80] and [ISO3200] and the available flash range also differs.
Wide: Approx. 80 cm to approx. 5.6 m
Tele: Approx. 30 cm to approx. 4.0 m
∫
Adjust the flash output
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
1 Press
3
(
È
) several times to display [FLASH], and then
press
2
/
1
to set the flash output.
•
You can adjust from [
j
2 EV] to [
i
2 EV] in steps of [1/3 EV].
•
Select [0 EV] to return to the original flash output.
2 Press [MENU/SET] to close the menu.
•
You can also close the menu by pressing the shutter button
halfway.
Note
•
When the flash output is adjusted, the flash output value appears on the upper left of the
screen.
•
The flash output setting is memorised even if the camera is turned off.
•
The flash output adjustment cannot be used while in [FLASH BURST] in scene mode.
ISO sensitivity
Available flash range
Wide Tele
AUTO 80 cm to 8.3 m
¢
30 cm to 5.9 m
¢
ISO80 80 cm to 2.3 m 30 cm to 1.6 m
ISO100 80 cm to 2.6 m 30 cm to 1.8 m
ISO200 80 cm to 3.7 m 30 cm to 2.6 m
ISO400 80 cm to 5.3 m 40 cm to 3.7 m
ISO800 80 cm to 7.4 m 60 cm to 5.3 m
ISO1600 1.15 m to 10.6 m 90 cm to 7.5 m
ISO3200 1.60 m to 14.9 m 1.30 m to 10.7 m