Panasonic VQT1T63 Operating Instructions Manual Download Page 59

Page: 59 / 210

- 59 -

Advanced (Recording pictures)

[REC] mode:

Taking Pictures using the Built-in Flash

To open the flash

Press the flash open button.

To close the flash

Press the flash until it clicks.

•

Be sure to close the flash when not

in use.

•

The flash setting is fixed to [

]

while the flash is closed.

Set the flash to match the recording.

•

Open the flash.

Press

[

‰

Press

to select a mode.

•

You can also press

[

‰

] to select.

•

For information about flash settings that can be selected, refer

“

Available flash settings by recording mode

”

(P61)

Press [MENU/SET].

•

You can also press the shutter button halfway to finish.

•

The menu screen disappears after about 5 seconds. At this time, the selected item is

automatically set.

Switching to the appropriate flash setting

OPEN

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands