- 149 -
Advanced (Playback)
This mode allows you to automatically display pictures vertically if they were recorded
holding the camera vertically or rotate pictures manually in 90
o
steps.
Select [ROTATE] on the [PLAYBACK] mode menu.
•
The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
Press
2
/
1
to select the picture and then press
[MENU/SET].
•
Motion pictures and protected pictures cannot be rotated.
Press
3
/
4
to select the direction to rotate the
picture and then press [MENU/SET].
Press [
‚
] to return to the menu screen.
•
Press [MENU/SET] to close the menu.
Select [ROTATE DISP.] on the [PLAYBACK] mode menu.
Note
•
When you play back pictures on a PC, they cannot be displayed in the rotated direction unless
the OS or software is compatible with Exif. Exif is a file format for still pictures which allows
recording information etc. to be added. It was established by “JEITA (Japan Electronics and
Information Technology Industries Association)”.
•
It may not be possible to rotate pictures that have been recorded with other equipment.
[ROTATE]/[ROTATE DISP.]
Rotate (The picture is rotated manually)
:
The picture rotates clockwise in steps of 90
o
.
:
The picture rotates counter-clockwise in steps of 90
o
.
Rotate display (The picture is automatically rotated and displayed)
Press
4
to select [ON] and then press [MENU/SET].
•
The pictures are displayed without being rotated when you select
[OFF].
•
Refer to
for information about how to play back pictures.
Press [MENU/SET] to close the menu.
1
2
3
4
1
2
3
