Panasonic VQT1T63 Operating Instructions Manual Download

Page: 14 / 210

Preparation

- 14 -

Preparation

Charging the Battery

•

Use the dedicated charger and battery.

•

The battery is not charged when the camera is shipped. Charge the battery before use.

•

Charge the battery with the charger indoors.

•

Charge the battery in a temperature between 10

C to 35

C. (The battery temperature should

also be the same.)

Attach the battery with
attention to the direction of the

battery.

Connect the charger to the

electrical outlet.

•

The AC cable does not fit entirely into

the AC input terminal. A gap will remain

as shown on the right.

•

Charging starts when the [CHARGE]

indicator

lights green.

plug-in type

inlet type

Detach the battery after
charging is completed.

•

Charging is complete when the

[CHARGE] indicator

turns off (after

approx. 130 min maximum).

Summary of Contents for VQT1T63



















































































































































































































Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands

Panasonic VQT1T63, Operating Instructions Manual

Search results

Summary of Contents for VQT1T63

Reviews:

Related manuals for VQT1T63

Brands by name

Popular brands