Software-based Commissioning
Â
Open browser
Â
Enter IP address (see Network-based Commissioning)
Â
Enter user name/password
Â
Accept the licence agreement
IMPORTANT
N
The Light Controller IP/DALI is delivered with the
following user name and password: "admin". This
should be changed following commissioning.
Starting the Setup Procedure for the
Light Controller IP/DALI
1. LANGUAGE SELECTION
System -> Settings -> select desired language.
2. SETUP
Recognition and integration of system components
• Select the Light Controllers and then integrate them into the
system via "Search", followed by confirmation with "Connect".
• Integrate luminaires (DALI control gear) and DALI input (input
devices: DALI push button and sensors) into the system by indi-
vidual lines and allocating names.
• Mains buttons are integrated into the system by allocating
names to the connected wired buttons.
• EnOcean components (wireless push buttons, door/window
contacts) must be pressed to be identified by the Light Control-
ler. System integration follows name allocation.
• Touch4Light
This lets you create your own switches and switch functions for
lighting control purposes as well as to activate or deactivate
certain components. The provided push-button and sliding con-
trols also let you use – a tablet PC or a smartphone to – switch
light on or off, dim lighting, call up lighting scenes and activate
time-controlled light sequences.
• IMPORTANT: Integrating VS Extenders will limit the entire system
to its basic control and adjustment functions. Please observe the
information provided on page 5.
3. CONFIGURATION OF SYSTEM COMPONENTS
Creation of Luminaire Groups
Configuration -> Groups
• Allocate group name (e.g. office, kitchen, hallway, etc.)
• Assign luminaires to the groups
IMPORTANT
N
It is not possible to integrate luminaires into more than
one group. For that reason, it is recommended to
create logical, functional groups. Functions that apply
to multiple groups can be set in the "Group Functions"
menu.
– Option 1: Assign all luminaires to one group. All luminaires
of all DALI lines can be assigned to a single group.
– Option 2: Individually assign luminaires to a specific group.
– Time-saving assignment: in addition, it is possible to use a
webcam (e.g. tablet PC) to identify a luminaire and thus as-
sign it to a group.
Definition of Group Functions
Configuration -> Group Functions
• Select the group whose functions you wish to configure. Groups
are listed alphabetically.
• Default setting of the minimum dimming level: 126 = 3%
(recommended for commonly available DALI control gear). This
value can be changed using the slider.
3
Quick Start Guide Light Controller IP/DALI
Quick-Star
t-Guide_Light Controller IP_EN_08. Juli, 2019
Vossloh-Schwabe Deutschland GmbH
· Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Tel. +49 (0) 23 51/10 10 · Fax +49 (0) 23 51/10 12 17 · www.vossloh-schwabe.com
A Member of the Panasonic Group
