Panasonic VL-W1-N Series, Setup And Maintenance Manual

Page: 45 / 176

45
2-3-4 Working field and center position
q
e
r
t t
w
Specified point
Model
VL-W1500-N VL-W1A00-N VL-W1506-N VL-W1A06-N
q
Center position of laser emission port 81.5 mm
w
Center position of laser emission port 109 mm
e
Work distance (base position) 315 mm 685 mm
r
Work distance (setting range) ± 15 mm
t
Working field (X, Y) 200 mm x 200 mm 400 mm x 400 mm
ワㄐㄕㄊ㄄ㄆ
• Do not place anything in the area between the laser emission port and lasing object during the lasing operation.
• Use anti-reflection material (ex. black paint for metal) for an external shutter or a protective enclosure in a path of laser
beam. It may cause a failure of the components inside the head.
• If any other devices such as a sensor or a camera are installed near the laser welding machine, make sure that these
devices are installed in the place where laser beam and its reflected beam do not damage to them.
ME-VLW1N-SM-1