2.
Click
Select All
.
3.
Click
Execute
to copy each Extension Number to Password.
•
When copying extension numbers to passwords, you can also use the
icon on the bottom left
of the Virtual SIP Extension Port Property screen.
3.
Programme the SIP extension you wish to register.
a.
Set the IP address of the Control Box, extension number, and password in the corresponding fields
for your SIP extension.
b.
Send a request from the SIP extension to the Control Box for registration.
•
If the authentication information of the SIP extension and the Control Box match, the registration
is successful.
Note
•
When programming the SIP extension, the names of the corresponding fields may differ
depending on the type of SIP phone you are using.
•
For details about the actual operation of SIP phones, refer to the documentation of the SIP phone.
•
For certain SIP phones, you may need to set a Sign-in name, which should consist of the
extension number and the IP address of the Control Box (e.g., [email protected]).
5.6.2 De-registering IP Telephones
De-registration of SIP Phones
The de-registration of SIP phones is carried out by deleting either the extension number or password
registered in the Control Box.
1.
Do the following settings.
a.
Click
Setup
→
Control Box Configuration
→
Configuration
→
Slot
.
b.
Click
V-SIPEXT
.
c.
Click
Port Property
.
2.
Do the following settings.
a.
Click the cell in the Connection column for the port of the SIP phone to de-register.
b.
In the Command window, click
OUS
to change the status of the port to "OUS".
3.
Repeat step
2
for each SIP phone to de-register.
4.
Delete either the extension number or password for the SIP phone to de-register, as shown here.
5.
Click
OK
.
5.7 Programming UM System Manager Features
The System Manager can send a message to multiple subscribers at one time (Broadcasting Messages).
If you will use the System Manager, you should change the password from its default value of "1234".
For details about changing the password, refer to "15 UM Configuration—[7] System Security" in the PC
Programming Manual.
For information about how to use Broadcasting Messages, refer to "2.1.1 System Manager Features" in the
Operating Manual.
5.6.2 De-registering IP Telephones
Installation Manual
51
