2.
On the
DHCP Server
tab, select
Enable
for
DHCP Server
.
3.
Enter valid settings for the
IP address auto assignment
.
Note
For details about
IP address auto assignment
settings, refer to "16.2.1 Network Service—[2-1]
Server Feature—DHCP(LAN)" in the PC Programming Manual.
4.
Click
OK
.
Note
If an external DHCP server is in use, do not enable the DHCP Server feature. Doing so may allocate
inappropriate IP addressing information to the devices.
5.4.4 Installing Additional Activation Keys
Depending on how many activation keys are purchased, the corresponding number of smartphones can be
activated by registering the activation keys to the system.
Installing the Activation Key Files
First, make sure that the VL-VN1800 control box is connected to an outside network and a PC.
1.
Log in to Web Maintenance Console using the Installer level account.
2.
Click
Maintenance
→
Utility
→
Activation key for Mobile
.
•
Activation key for Mobile
window is displayed.
•
The current activation key’s status is displayed.
–
Total Activation: total number of registered activation keys
–
Used Activation: number of currently used activation keys
3.
Enter activation key in the
Input Activation key for Mobile box
.
•
For information about activation keys, refer to the leaflet supplied with VL-AKA005.
4.
Click
OK
.
5.
A confirmation message appears. Click
OK
to save settings.
Note
The activation key cannot be reissued unless the MPR card that is housed on the motherboard in the
Control Box crashes.
5.5 Assigning Networking Information to IP
Telephones
An IP telephone cannot be used unless it is registered in the User Container, even if the IP addressing
information is assigned to the telephone as explained in this section.
5.5.1 Assigning IP Addressing Information
The IP telephone’s IP address, subnet mask address and default gateway address, as well as the IP
address of the registering Control Box must be assigned to the IP telephone before it can be used on the
network. This IP addressing information can be assigned in the following ways:
Using a DHCP server (DHCP Server feature or an external DHCP server) to automate the assignment
of IP addressing information
5.4.4 Installing Additional Activation Keys
Installation Manual
49
