1.6 User Device Management
1.6.1 Introduction to the User Container Feature
The User Container feature links the user to each Control Box device, and is configured to provide services
and perform maintenance on a per-user basis.
Each user has a SIP extension as their main device and a Unified Messaging mailbox. Users may also have
a sub device.
The user can use service features on any device by using the extension number of the main device as a
representative number.
•
Each user can set the grade, usable devices, and extended features vary depending on the
grade.
•
By calling the user's main extension, it is possible to send an incoming call signal to the
main device and sub device at the same time.
•
It is possible to send an incoming call signal to a sub device at a predetermined time delay
from the time of an incoming call to the main device.
•
When one of the devices registered to 1 user answers an incoming call, the incoming signal
on the other devices will be stopped and only the responsive device will be able to speak
with the other party.
•
When DND/FWD is set using any of the user-owned devices, the setting is applied to
incoming calls for that user.
•
When one of the user's devices is busy, none of the user's devices can be used to make a
call.
1.6 User Device Management
34
Operating Manual
Summary of Contents for VL-VN1800
Page 4: ...Introduction 4 Operating Manual ...
Page 6: ...Table of Contents 6 Operating Manual ...
Page 42: ...Note 42 Operating Manual ...
Page 43: ...Note Operating Manual 43 ...
