5.7 Programming multiple control boxes
For systems that support enhanced features version 2 or later (page 92)
To increase the number of control boxes (max. of 4) that are connected to an extension box, do the following
operations.
The following illustration is an example of when 3 extensions boxes are connected to 4 control boxes.
Extension
box (2)
Extension
up to 6
Distribution
Main
monitor
Lobby
station
group
Control box (1)
PC
Lobby
up to 6
Lobby
station
group
Extension
box (2)
Extension
up to 6
Lobby
station
group
Lobby
up to 6
Lobby
station
group
Distribution
Main
monitor
Control box (2)
Control box (3)
Control box (4)
PC
PC
PC
PC setup tool
2
3
1
PC setup tool
2
3
1
PC setup tool
2
3
1
PC setup tool
2
3
1
1
PC setup tool: Load and edit the data
Start the setup tool. In the
[Load and edit the data]
section, configure the required
[Room settings]
and
[General
settings]
.
2
PC setup tool: Upload the data to device (when connected to control box 1)
To upload the system information using control box 1:
a.
Connect the PC to control box 1.
b.
Click
[1]
to select control box 1 as shown next to "
A
".
c.
Click all of the devices that you want to upload settings to as shown next to "
B
", and then click
[Upload]
.
73
5. Programming
