![background image](http://html1.mh-extra.com/html/panasonic/vl-sdm200a/vl-sdm200a_operating-instructions-manual_4207704017.webp)
Attaching the Wireless Camera
Before attaching the Wireless Camera (Installation preparation)
Wireless Camera range
R
Views when the camera is set
“
WIDE
”
(default).
When using with a door with a height of 2 m (6 ft 7 in.)
Side view
Top view
approx. 90
approx.
50 cm
(1 ft 8 in.)
approx. 120
approx. 180 cm
(5 ft 11 in.)
approx. 50 cm (1 ft 8 in.)
Attaching the Wireless Camera to a door
Inner side of the door
Inside
Outside
Wireless unit
Camera unit
Surface of the door
R
Attach the Wireless Camera to a door in a protected area that is not directly exposed to the elements,
such as under a roof or eave.
R
Connect the Base Unit to the power outlet and turn it on.
R
Attach the Wireless Camera to a flat area on the surface on the door.
R
Wipe dirt and moisture from the surface of the door where the Wireless Camera will be attached.
R
Remove the protection film from rear side of the wireless unit.
17
Getting Started
Summary of Contents for VL-SDM200A
