Panasonic VL-CM851A, Operating Instructions Manual

Page: 30 / 52

Canceling unused Wireless Monitors
R These operations are performed on the included Wireless Monitor, and can also be performed on the
additionally paired Wireless Monitor.
R The pairing of the Wireless Monitor performing operations cannot be canceled.
1
Press M MENU N .
2
Select “
ALL SETTINGS
” by pressing MDN , MCN , MFN , or MEN , then press M N (monitor button) ( “
OK
” ).
3
Select “
PAIRING/CANCEL
” by pressing MDN or MCN , then press M N (monitor button) ( “
OK
” ).
4
Select “
CANCELATION
” by pressing MDN or MCN , then press M N (monitor button) ( “
OK
” ).
5
Select “
MONITOR
” by pressing MDN or MCN , then press M N (monitor button) ( “
OK
” ).
6
Select the Wireless Monitor to cancel by pressing MDN or MCN , then press M N (monitor button)
( “
OK
” ).
R In the following situations, Wireless Monitors are displayed in gray and cannot be canceled.
– when trying to cancel the pairing of a Wireless Monitor that is performing operations.
– when there is a Wireless Monitor that has not been paired.
7
To finish the operation, press M MENU N 2 times.
Important:
R In order to prevent false operations, remove the battery packs from canceled Wireless Monitors.
Replacing batteries or battery packs
n Batteries used in the Wireless Camera
When the batteries of the Wireless Camera run out of power ( ), exchange them with new batteries.
R ONLY USE Alkaline AA batteries.
R Refer to page 19 for information on how to insert batteries.
R To prevent the Wireless Camera from falling down, make sure to close the door and turn off the
power of the Wireless Camera before replacing batteries.
n Battery pack used in the Wireless Monitor
When the Wireless Monitor’s battery pack runs out of power soon after being charged, exchange it with a
new battery pack.
R Use the separately sold CGA-LB102 for a replacement battery pack (page 4).
– Battery specifications: lithium ion battery, DC 3.7 V, 940 mAh.
R Refer to page 15 for information on how to insert battery packs.
Cleaning
R Clean the unit with a soft, dry cloth. For excessive dirt, wipe the unit with a slightly damp cloth.
R When cleaning the Base Unit, electrical parts, and power plug, make sure to unplug the power plug
from the power outlet.
30
Useful Information