Accessories
●
Quick Start Guide
9
Assembling the pedestal
■
Remove the Cable cover from the Frame
.
Cable cover will be used again after the
●
pedestal is attached to the Display Unit.
B
Cable cover
Use the assembly screws
to fasten securely.
Make sure that the screws are securely tightened.
●
Be careful not to scratch the surface (part with gloss finish) of the base during assembly.
●
A
A
B
B
C
Hole for the
Base installation
Securing the Display Unit
■
Slide the pedestal frame posts into the brackets on
the rear of the Display Unit.
Use the assembly screws
to fasten securely.
Make sure that the screws are securely tightened.
●
E
Attach the Holder cover
with assembly screws
.
Make sure that the screws are securely tightened.
●
D
F
Attach the Cable cover.
Cable cover
Place a cable in
●
the groove as
necessary and
attach the Cable
cover.
The lower part
of the groove is
separated in right
and left. Use the
one suitable for
you.
