12
Connecting the Display Unit and the Tuner Box
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Conditions
■
If you are going to place the Tuner Box close to or under the Display Unit, it is recommended to connect them
●
using the supplied HDMI cable.
If your installation layout is not suitable for using the Wireless Unit (Example 2), connect them using the
supplied HDMI cable.
Example 1
(below)
You can place the Tuner Box and the Display Unit in a flexible way using the Wireless Unit (not using any
●
cables between the Display Unit and the Tuner Box). To use wireless connection between the Display Unit and
the Tuner Box, ensure that the Wireless Transmitter and the Wireless Receiver are positioned to face each
other without any obstructions.
Example 2
(p. 12 and p. 13)
Example 1
■
Tuner Box
TU-Z100ER
●
HDMI cable
K1HY19YY0004
●
AUDIO
IN
COMPONENT
AUDIO
OUT
DIGITAL
AUDIO OUT
HDMI 1
P
B
Y
P
R
L
R
L
R
HDMI 2
HDMI 3
A
B
Rear of the Display Unit
Rear of the Tuner Box
Mains lead
AC 220-240 V
50 / 60 Hz
Mains
lead
Tuner Box
or
K1HY19YY0006
●
HDMI cable
3.0 m
Basic Connection
Example 2
■
The Wireless Unit uses 60 (59.40 - 61.56) GHz frequency band. Do not use the Wireless Unit near the
●
equipment using the same frequency band to avoid the interference.
It may take a while to change the input mode when using the Wireless Unit. To resolve this, use the supplied
●
HDMI cable to connect the Display Unit and the Tuner Box. Example 1 (above)
Picture and sound may be interrupted or lost completely depending on the positioning of the Wireless
●
Transmitter or obstacles (furniture, AV equipment, rack, rack door, etc.) between the Wireless Transmitter
and the Wireless Receiver. To resolve this, change the installation layout to avoid any obstacles between the
Wireless Transmitter and the Wireless Receiver.
Transmission Range of the Wireless Unit
: Available area to place the Wireless Transmitter
40°
5°
Wireless
Transmitter
Wireless
Transmitter
View from the side
View from the top
10 m
10 m
5 m
5 m
80°
80°
Wireless
Receiver
Display
Unit
Display Unit
Tuner Box
Tuner Box
Wireless
Receiver
45°
45°
5 m
5 m
Adjust the angle of the
●
Wireless Transmitter to
face the Wireless Receiver.
Caution
Do not place the Wireless Unit in the following locations to avoid poor signal condition or unit failures.
●
Location subject to be high temperature (near the heater, etc.)
•
Location with poor air circulation (at the end of a closed rack, etc.)
•
Keep the Wireless Unit away from the devices such as wireless LAN, microwaves, mobile phones or other
●
electric equipment to avoid radio wave interference. Otherwise malfunction or slow response may occur.
Note
The range may be shortened depending on the obstacles, the surrounding environment or building structure.
●
Ensure the Wireless Transmitter is facing the Wireless Receiver.
●