Panasonic Viera TX-P42ST50B Page 43 Operating Instructions Manual Download

Page: 43 / 112

How to Use Menu Functions

Menu

Item

Adjustments / Configurations (alternatives)

Setup

TV Guide Settings

TV Guide View

Changes the layout of TV Guide

[Normal] / [Full] / [Info]

[Normal]:

Default TV Guide screen

[Full]:

Displays channels and programmes full-screen without the operation guide

[Info]:

Displays details of the selected programme at the bottom without the

operation guide

Eco Navigation

Automatically sets the TV to the most suitable energy-saving mode

●

If you press the OK button, the following items are set as below:
[C.A.T.S.], [VIERA Link], [Standby Power Save], [Power Save]   [On]
[Intelligent Auto Standby]   [On (No reminder)]
[Auto Standby]   [2 hours]

Recording Setup

Settings for the recording feature of the USB HDD (p. 62)

Link Settings

VIERA Link

Sets to use VIERA Link functions

[Off] / [On]

(p. 87)

HDMI Content
Detection

Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable

[Off] / [Auto]

●

This function is available if the connected equipment supports HDMI Content
Type.

●

The content type information will be displayed for several seconds when this
function works.

AV1 out

Chooses the signal to be transmitted from the TV to Q-Link

[TV] / [AV2] / [Monitor]

[Monitor]:

Image displayed on screen

●

Component and HDMI signals cannot be output.

Standby Power
Save

Controls the connected equipment to reduce power consumption in Standby

[Off] / [On]

(p. 88)

●

This function is available when [VIERA Link] is set to [On].

Intelligent Auto
Standby

Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption

[Off] / [On (With reminder)] / [On (No reminder)]

(p. 88)

●

This function is available when [VIERA Link] is set to [On].

Q-Link Download

Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV

Child Lock

Applies access control for channels or inputs to prevent unwanted access (p. 56)

Tuning Menu*

Favourites Edit

Creates a list of favourite channels (p. 51)

●

Not valid on Analogue mode

Channel List

Skips the unwanted channels or edits channels (p. 52)

Auto Setup

Automatically searches for the receivable channels (p. 50)

Channel Sorting by
Region

Automatically sorts tuned channels according to the available region (p. 52)

●

For DVB mode

Manual Tuning

Searches for the channels manually (p. 53)

Summary of Contents for Viera TX-P42ST50B

















































































































Search results

Summary of Contents for Viera TX-P42ST50B

Reviews:

Related manuals for Viera TX-P42ST50B

Brands by name

Popular brands

Panasonic Viera TX-P42ST50B, Operating Instructions Manual

Search results

Summary of Contents for Viera TX-P42ST50B

Reviews:

Related manuals for Viera TX-P42ST50B

Brands by name

Popular brands