68
Message
Meaning / Action
Found new software version ***.
Press OK to start update
(may take 40 mins)
or Press EXIT to ignore.
and you can update when TV is in standby.
There is a new software available.
Invalid operation - Please check settings
and connections.
Check the Q-Link or VIERA Link connection and setting (p. 50 - 53).
Invalid system time. Please exit !
Cannot get the time information. Check the connection of the RF cable.
Max. number of Timers already set !
The maximum number of timer programming events is 15.
New channels found!
Press OK to update Channel List
Press EXIT to ignore.
There may be new channels available.
This message will appear each time a change is made by the
broadcasters. This message can be deactivated by setting “New Channel
Message” to Off in “DVB Tuning Menu”.
Selecting OK will be performed “Update Channel List”.
No channel found.
Please check aerial or local channel
availability.
Press OK to start Auto Setup.
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
No module inserted
Check the CI module inserted completely (p. 43).
No recording - Check media
The tape or disc may be “write protected”, missing or damaged.
No recording - Already recording
The equipment may already be recording.
No recording - Unknown reason
The recording may not be performed. Check the equipment.
Disc or tape may be full.
No service
The broadcaster has stopped the service. Check the channel in the TV
Guide. (p. 18 and p. 19)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
PIN incorrect!
The PIN number you entered is wrong.
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 53).
Please wait.
A function is in progress.
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition
Completed.
Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
Sending Preset Data
Please wait!
Q-Link or VIERA Link channel download is in progress.
Software successfully updated.
Press EXIT to continue.
The software updating is finished.
Software update failed. Please try again later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 42).
If this is still unsuccessful, there may not be any new software available.
On screen messages
