Panasonic VIERA TH-P55VT60A Quick Manual Download Page 155

Page: 155 / 199

- 155 -

●

Remove soil stuck to the pen tip with a cotton swab, etc. Be careful not to

subject the pen tip to impact since it is equipped with the sensor. Using

with soil or foreign matters attached will cause scratch of the screen.

Bluetooth devices

Bluetooth Setup

You can use Bluetooth keyboards and Bluetooth audio devices

(headphones, etc.) with this TV by setting

Bluetooth Setup

in the Setup Menu.

Settings Setup Bluetooth Setup

: HID (Human Interface Device Profile) compliant keyboards can be used.
: A2DP (Advanced Audio Distribution Profile) compliant audio devices can

be used.

1. Display the menu with

2. Select

Setup

Bluetooth Setup

with / and press

to access

3. Select

Devices

Bluetooth Audio Settings

with / and press

access

Devices

Searches the available device and displays the status.

●

You cannot use two or more A2DP compliant audio devices

simultaneously.

Not paired

The device is not registered. Register the device by following the on-

screen instructions to use with this TV.

Connected

The device is registered and you can use with this TV.

Not connected

The device is already registered, but not connected to this TV. Check

the device is turned on and set within the available range.

Bluetooth Audio Settings

Adjusts the delay time and volume for the audio device.

Lip Sync

Lip Sync Adjustment

If the sound of the audio device does not synchronise the image, set

Lip Sync

and adjust in

Lip Sync Adjustment

●

This function is available only for the Bluetooth audio devices.

Summary of Contents for VIERA TH-P55VT60A








































































































































































































Search results

Summary of Contents for VIERA TH-P55VT60A

Reviews:

Panasonic VIERA TH-P55VT60A, Quick Manual, Page: 155 / 199

Search results

Summary of Contents for VIERA TH-P55VT60A

Reviews: