Panasonic Viera TH-P50UT30D, Service Manual

Page: 27 / 116

27
9.18. Remove the Attachment metal
bottom
1. Remove the Radiator plate. (See section 9.13.)
2. Remove the screws (
×
1 each) and remove the Attach-
ment metal bottom (L, R).
9.19. Remove the Attachment metal
top
1. Remove the Cabinet assy. (See section 9.17.)
2. Remove the screws (
×
2 ,
×
2 ) and remove the
Attachment metal top (L, R).
9.20. Remove the Glass holders
1. Remove the Cabinet assy. (See section 9.17.)
2. Remove the screws (
×
7 ).
3. Remove the Glass holder top.
4. Remove the screws (
×
7 ).
5. Remove the Glass holder bottom.
6. Remove the screws (
×
4 ).
7. Remove the Glass holder side (L, R).
9.21. Remove the K-Board
1. Remove the Glass holder bottom. (See section 9.20.)
2. Remove the claw (
×
1 ).
3. Disconnect the connector (K1) and Remove the K-Board
from LED Panel.
9.22. Remove the V-Board
1. Remove the Glass holder bottom. (See section 9.20.)
2. Remove the screw (
×
1 ) and remove the claws (
×
3
).
3. Disconnect the connector (V14) and remove the V-Board
from the 3D emitter panel.