Panasonic Viera TH-42AS640A User Manual Download Page 98

Page: 98 / 189

- 98 -

●

Regarding performance, not all USB HDDs are guaranteed. Check the

USB HDDs that have been tested for compatibility with this TV at the

following website.
http://panasonic.net/viera/support (English only)

Photo format

■

Supported Photo formats

●

JPEG (.jpg, .jpeg, .mpo)
Sub-sampling:

4:4:4, 4:2:2, 4:2:0

Image resolution (pixel):

8 × 8 to 30 719 × 17 279

●

DCF and EXIF standards

●

Progressive JPEG is not supported.

= Note =

●

Some files may not be played back even if they fulfil these conditions.

●

Do not use multi-byte characters or other special codes for file names.

●

Connected devices may become unusable with this TV if the file or folder

names are changed.

Video format

■

Supported Video formats

●

AVI (.avi)
Video codec:

H.264 BP/MP/HP, MPEG1, MPEG2, MPEG4 SP/ASP, VC-1, Windows

Media Video Ver. 9

Audio codec:

AAC, ADPCM, Dolby Digital, Dolby Digital Plus, DTS core, HE-AAC,

LPCM, MPEG Audio, MP3, WMA, WMA Pro

●

Some subtitles or chapter functions may not be available.

Summary of Contents for Viera TH-42AS640A






























































































































































































Search results

Summary of Contents for Viera TH-42AS640A

Reviews:

Related manuals for Viera TH-42AS640A

Brands by name

Popular brands

Panasonic Viera TH-42AS640A, User Manual

Search results

Summary of Contents for Viera TH-42AS640A

Reviews:

Related manuals for Viera TH-42AS640A

Brands by name

Popular brands