VQT3M88
43
SETUP
1
Image stabilizer (page 74)
h
Compensate for camera shake
during recording.
2
Focus (page 75)
h
Adjust the focus according to
the distance to the subject.
3
Focus mode
4
Metering mode
5
ISO sensitivity (page 76)
h
The indicated ISO value is the
standard output sensitivity.
6
White balance (page 77)
7
Remaining battery power
indication (page 121)
: During video recording, the
image stabilizer is always
active.
: Camera shake in the
captured photo is
corrected.
: Camera shake during video
and photo recording is
compensated for and
corrected.
: The image stabilizer is not
active.
*
: The camera automatically
focuses on the subject with
a range of 10 cm (3.9”) to
∞
(normal).
-
: The focus can be set
manually.
: The camera focuses on the
subject within a range of
1 cm (0.4”) to
∞
(macro).
: 9-point range finder focus
: Spot focus
A focus mark
'
appears in
the center of the LCD
monitor.
n
: Multi-metering
W
: Center-weighted light
measuring
Y
: Spot light-measuring
A metering spot
@
mark
appears in the center of the
LCD monitor.
=
: Sensitivity is set
automatically
*
: Sets sensitivity to ISO 50
u
: Sets sensitivity to ISO 100
v
: Sets sensitivity to ISO 200
w
: Sets sensitivity to ISO 400
6
: Sets sensitivity to ISO 800
-
: Sets sensitivity to ISO 1600
z
: Set sensitivity to ISO 3200
(HX-DC10)
>
: White balance is
automatically adjusted
depending on the ambient
lighting (auto).
: For shooting in sunny
conditions (sunny).
o
: For shooting in overcast
conditions (cloudy).
: For shooting under
incandescent lighting
(incandescent).
: For setting the most
accurate white balance
(white set).