Panasonic Vericam 35, Operating Manual

Page: 69 / 119

– 69 –
Chapter 8 Output and Screen Display — <MON OUT2> output
<MON OUT2> output
Output format is set in [MENU] → [SYSTEM SETTINGS] → [MON OUT].
The setting details of the status display and marker display are the same as the details for the <MON OUT1> terminal. Each can be set to be displayed
or hidden.
f
Output signal can be switched in [MENU] → [SYSTEM SETTINGS] → [MON OUT] → [MON OUT2 SIGNAL SEL].
[MON OUT1]: The image (output image, etc.) becomes the same image as the output from the <MON OUT1> terminal.
[VF]: The image (output image, marker, status, enlargement, etc.) becomes the same image as the output from the <VF SDI> terminal. Regardless of
the [MON OUT] setting, LEVEL-A signal of 3G SDI is output from the <MON OUT2> terminal.
Output format list
[SYSTEM MODE] [MON OUT] Output Format
[FREQUENCY] [PIXEL] [MAIN CODEC] [MON OUT2
SIGNAL SEL]
[1080p to 1080i] Signal Format
[23.98p]
[29.97p]
[59.94p]
[4096 × 2160] [AVC-Intra4K 422] [MON OUT1] [OFF] 2048 × 1080
59.94P
4:2:2
3G
[ON]
1920 × 1080
59.94i
4:2:2
1.5G*
[VF] — 1920 × 1080
59.94P
4:2:2
3G
[25.00p]
[50.00p]
[4096 × 2160] [AVC-Intra4K 422] [MON OUT1] [OFF] 2048 × 1080
50.00P
4:2:2
3G
[ON] 1920 × 1080
50.00i
4:2:2
1.5G*
[VF] —
1920 × 1080
50.00P
4:2:2
3G
[23.98p]
[29.97p]
[59.94p]
[3840 × 2160]
[1920 × 1080]
[AVC-Intra4K 422]
[AVC-Intra100]
[MON OUT1] [OFF] 1920 × 1080
59.94P
4:2:2
3G
[ON] 1920 × 1080
59.94i
4:2:2
1.5G
[VF] — 1920 × 1080
59.94P
4:2:2
3G
[25.00p]
[50.00p]
[3840 × 2160]
[1920 × 1080]
[AVC-Intra4K 422]
[AVC-Intra100]
[MON OUT1] [1080p]
1920 × 1080
50.00P
4:2:2
3G
[1080i] 1920 × 1080
50.00i
4:2:2
1.5G
[VF] — 1920 × 1080
50.00P
4:2:2
3G
* The horizontal effective pixels are converted from 2048 pixels to 1920 pixels to squeeze the image.