Panasonic Vericam 35, Operating Manual

Page: 23 / 119

– 23 –
Chapter 3 Preparation — Assembling modules
Mounting the Electronic HD color viewfinder
Fig. 1 Fig. 2
Release
Lock
1
Attach the slider unit to the viewfinder mounting holes on top of the camera module using the two supplied screws. (Fig. 1)
2
Slide the viewfinder plate from above into the slider unit. (Fig. 2)
Release the viewfinder lock lever by pushing it forward.
3
Push down the lock lever backwards to lock.
4
Connect the supplied connecting cable to the viewfinder connection terminal and the camera module’s <VF> terminal.
Connect by aligning the red mark on the connector.
Disassembling
a
a: Stopper
1
Remove the connecting cable.
2
Push down the lock lever towards the front to release the lock.
3
Lift the viewfinder while pulling the stopper.
4
Remove the slider unit clamping screw.