Panasonic VB-44210G User Manual Download Page 232

Page: 232 / 394

Chapter 5. DSLT Features

Section 700 - Operation

5-14

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

Call Pickup

(All Versions)

DSLTs can use both directed and group call pickup.

Direct Call Pickup

Description

A call to an extension can be answered from any other extension with the
Direct Call Pickup feature.

Operation

1. Lift the handset.

2. Dial

“79.”

3. Enter the number of the ringing extension.

Related Programming

• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B

3.1 or higher)

• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and

CPC-B Version 3.1 or higher)

Considerations

• If more than one caller is attempting to reach the ringing extension, the

Direct Call Pickup feature answers the call that arrives first.

Once the call has been picked up, other extensions that attempt to pick up
the call receive busy tone.

• You can answer incoming calls, intercom calls (both tone and voice), call

waiting, paging, transferred calls, or recalls using the Direct Call Pickup
feature. You cannot answer callbacks with this feature.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands