Panasonic VB-44210G User Manual Download Page 160

Page: 160 / 394

Chapter 4. Key Telephone Features

Section 700 - Operation

4-44

DBS Manual - Revised April 2000

DBS-2.3/9.2-700

Dial Tone Disable

(All Versions)

Description

The intercom dial tone can be turned off at a phone. Dial tone is turned off
when a headset is used.

Operation

To disable the intercom dial tone:

1. Press

the

ON/OFF

key.

• The phone issues intercom dial tone.

• The

ON/OFF

LED lights.

2. Press

“#50.”

3. Press

the

ON/OFF

key.

The

ON/OFF

LED goes off.

To reactivate dial tone:

Repeat the preceding steps.

Summary of Contents for VB-44210G











































































































































































































































































































































































































Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands

Panasonic VB-44210G, User Manual

Search results

Summary of Contents for VB-44210G

Reviews:

Related manuals for VB-44210G

Brands by name

Popular brands