Panasonic VARICAM LT, Operating Manual

Page: 98 / 182

– 98 –
Chapter 9 Other Useful Functions — Handling setting data
Handling setting data
File structure of the setting data
The [SCENE1] to [SCENE5] scene files can be saved in the camera according to the scene file number.
Scene file ([SCENE1] to [SCENE5]) data can be saved as a file in the SD memory card, which can be loaded and used.
The setting value that can be saved as a scene file is the content of [MENU]
→ [SCENE FILE SETTINGS].
Setting data file structure of the camera is as follows.
r
Scene file
*1 *1 *1 *1 *1
*2 *2 *2 *2 *2
*3
(Factory settings)
The camera
(Current value)
(Value saved on the camera)
SD memory card
Scene file 1
Scene file 8
[SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5]
[SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5]
[SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5]
[SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5]
[SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5]
*1 Select [INITIALIZE] in [MENU] → [SCENE FILE SETTINGS] → [SCENE DATA].
*2 Select [LOAD] or [SAVE] in [MENU] → [SCENE FILE SETTINGS] → [SCENE DATA].
*3 Select [LOAD(SD CARD)] or [SAVE(SD CARD)] in [MENU] → [FILE] → [SCENE FILE].
[SCENE1] to [SCENE5] at once
Handling SD memory cards
The SD memory card can be removed and inserted, either before or after the power is turned on.
Inserting SD memory cards
Fig. 1 Fig. 2
1
Open the slot cover. (Fig. 1)
2
Insert the SD memory card with the label facing up into the sub slot, and close the slot cover. (Fig. 2)