Panasonic VARICAM LT, Operating Manual

Page: 92 / 182

– 92 –
Chapter 8 Output and Screen Display — Output
Output
Output format list
f
HD (1920 × 1080) is always output as the output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI> terminals regardless of the [MENU] → [SYSTEM
SETTINGS] → [SYSTEM MODE] → [MAIN PIXEL] settings.
It is output in HD letterbox (black band at top and bottom of the output video) when [MAIN PIXEL] is set to [4096 × 2160] or [2048 × 1080].
f
The setting for the <SDI OUT 1>/<SDI OUT 2> terminal can be switched in conjunction.
f
It is output in the format in the table regardless of the enable/disable of the variable frame rate.
f
The output video from the <SDI OUT 2> terminal can be set in [MENU] → [OUTPUT SETTINGS] → [SDI OUT] → [SDI OUT 2 SIGNAL SEL].
- [SDI OUT 1]: It will be the same video as the output from the <SDI OUT 1> terminal.
The color setting and setting for display/hide of the marker/indicator can be set individually.
- [VF SDI]: It will be the same video (color, marker, indicator, format) as the output from the <VF SDI> terminal.
[FREQUENCY]
Output Format
<SDI OUT 1> terminal
<SDI OUT 2> terminal
<VF SDI> terminal
[23.98p] 23.98PsF
59.94p
59.94i
However, this becomes 23.98PsF when [MAIN CODEC] is set to [AVC-Intra2K
444] and [AVC-Intra444].
[24.00p] 24.00PsF
60.00p
60.00i
However, this becomes 24.00PsF when [MAIN CODEC] is set to [AVC-Intra2K
444].
[25.00p] 25.00PsF
50.00p
50.00i
However, this becomes 25.00PsF when [MAIN CODEC] is set to [AVC-Intra2K
444] and [AVC-Intra444].
[29.97p] 29.97PsF
59.94p
59.94i
However, this becomes 29.97PsF when [MAIN CODEC] is set to [AVC-Intra2K
444] and [AVC-Intra444].
[50.00p]
50.00p
50.00i
50.00p
50.00i
[50.00i] 50.00i 50.00i
[59.94p]
59.94p
59.94i
59.94p
59.94i
[59.94i] 59.94i 59.94i