Panasonic VARICAM LT, Operating Manual

Page: 89 / 182

– 89 –
Chapter 7 Viewfinder — Convenient shooting functions
f
The display mode can be set in [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [EXPAND MODE]/[- POS1]/[- VALUE1]/[- POS2]/
[- VALUE2].
@ @ NOTE
t
The output video from the <VF SDI> terminal is enlarged.
t
The output from the <SDI OUT 1> terminal is not enlarged.
t
The output from the <SDI OUT 2> terminal will be the same display as the output from the <VF SDI> terminal when [VF SDI] is selected in [MENU] →
[OUTPUT SETTINGS] → [SDI OUT] → [SDI OUT 2 SIGNAL SEL].
Focus in color
Peaking display (focus in red)
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FOCUS IN COLOR SW] to [ON].
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- COLOR SEL] to [RED].
Adjust the focus so that the contours of the subject you want to focus on turn red.
[GREEN] or [WHITE] can also be selected in [MENU]
→ [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- COLOR SEL].
The region that is colored is changed by [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- PEAKING VALUE].
The video in background can be changed to monochrome by [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- MONO].
@ @
NOTE
t
This is displayed only on the output video from the <VF SDI> terminal.
Focus square display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FOCUS SQUARES SW] to [ON].
Adjust the focus so that the square size displayed in the area of the subject to be focused becomes the largest.
When focused on the doll When focused on the panel
@ @ NOTE
t
This is displayed only on the output video from the <VF SDI> terminal.
Monochrome display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [MONO SW] to [ON].
@ @ NOTE
t
This is displayed only on the output video from the <VF SDI> terminal.
False color mode
Check the exposure using the false color.
Set [MENU]
→ [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FALSE COLOR SW] to [ON].
Image will be displayed with colors sored by luminosity signals. Images of other levels are displayed in black and white.
The false color can be displayed through output from the <VF SDI> terminal.
Display patterns
r
When [MAIN COLOR] is [V-Log]
Color Level Description
(Red)
(White clip − 3%) or more*
White-level clip
(Yellow)
(White clip − 6%) to (White clip − 3%)*
Lower area of the white-level clip
(Pink)
48.7% - 51.8% One-stopover color from neutral gray