Panasonic VARICAM LT, Operating Manual

Page: 45 / 182

– 45 –
Chapter 4 Video Recording and Color Grading — Color setting
Color setting
Applies the LUT to the recording image and monitor image.
It also sets the mode such as V-Log or V-709.
COLOR screen setting
The following settings can be set in the COLOR screen. These can also be set from [MENU].
f
[MAIN COLOR]: Color setting for main recording
f
[Grading SEL]: Grading function setting
f
[PROXY COLOR]: Color setting for proxy recording
f
[3D LUT]: Setting for the 3D LUT function
f
[CDL]: Setting for the CDL function
f
[SDI SET]: Color setting for the output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI> terminal
Control combinations through settings
[MAIN COLOR] [Grading SEL] [PROXY COLOR] [3D LUT] [CDL]
[SDI SET]
[SDI OUT 1]
[SDI OUT 2]
[VF]
[V-Log]
[External App]/
[Internal]
[V-Log]
[OFF]/[V-709]/
[Loaded File]
[ON]/[OFF]
[V-Log]
[Grading]
[V-Log]
[Grading]
[Grading]
[OFF]
[V-Log]
[OFF] [OFF]
[V-Log]
[V-709]
[V-Log]
[V-709]
[V-709]
[SCENE1]
[SCENE2]
[SCENE3]
[SCENE4]
[SCENE5]
[OFF]
[SCENE1]
[SCENE2]
[SCENE3]
[SCENE4]
[SCENE5]
[OFF] [OFF]
[SCENE1]
[SCENE2]
[SCENE3]
[SCENE4]
[SCENE5]
[SCENE1]
[SCENE2]
[SCENE3]
[SCENE4]
[SCENE5]
[MAIN COLOR] setting
Sets the video (color of entire camera system) that is recorded in the main slot.
Fig. 1 Fig. 2
[MAIN COLOR] setting is displayed in the status display area at the center of the COLOR screen.
[MAIN COLOR] is the item to be set as the master color space for that project only once before the production is started.