Panasonic VARICAM LT, Operating Manual

Page: 123 / 182

– 123 –
Chapter 10 Menu Operations — Menu list
Item Description of settings
[UB MODE] Selects the user bits mode.
[FRAME RATE]: Selects camera imaging information (such as frame rate).
[USER]:
Selects the user bits value that has been set.
[EXT INPUT]: Records the user bits values currently input to the <TC IN/OUT> terminal.
[TIME]: Selects the local time. (hh, mm, ss)
[DATE]: Selects the local date and time. (YY, MM, DD, hh)
[USER CLIP NAME (TYPE3)]: CAM INDEX (A-Z) in ASCII character code will go into MSB. Also, the
REEL number in ASCII character code will go into LSB 3 digits.
Example: A123=0x41 0x31 0x32 0x33
0XFFFF is recorded if [USER CLIP NAME] is set to anything other than [TYPE3].
f
Factory setting: [USER CLIP NAME (TYPE3)]
[TC IN/OUT SEL] Sets the input/output of the <TC IN/OUT> terminal.
[TC IN], [TC OUT]
f
Factory setting: [TC IN]
[TC OUT] Selects the time code output to the <TC IN/OUT> terminal.
[TCG], [TCG/TCR]
f
Factory setting: [TCG]
[TC OUT REF] Sets the output delay of the time code output from the <TC IN/OUT> terminal.
[RECORDING], [SDI OUT]
f
Factory setting: [RECORDING]
[REC METADATA] [LOAD] Loads the metadata upload file saved to the SD memory card.
[RECORD] Sets whether to add loaded metadata at a recording.
[ON]: Adds metadata.
[OFF]: Does not add metadata.
f
Factory setting: [OFF]
[USER CLIP NAME] Sets data to be recorded to [USER CLIP NAME].
(When [RECORD] is [ON])
[TYPE1]: Records setting values of the loaded data.
[TYPE2]: Records the loaded data and counter value.
[TYPE3]: Records the setting value prescribed with CAM INDEX or REEL number.
(When [RECORD] is [OFF])
[TYPE1]: Records the same value as [GLOBAL CLIP ID].
[TYPE2]: Records the same value as [CLIP NAME].
[TYPE3]: Records the setting value prescribed with CAM INDEX or REEL number.
f
Factory setting: [TYPE3]
[CAM INDEX] Sets CAM INDEX used in [TYPE3] of [USER CLIP NAME].
[A] - [Z]
f
Factory setting: [A]
[NEXT REEL COUNT] Sets REEL used in [TYPE3] of [USER CLIP NAME]. The REEL number for the card that the REEL number
is already assigned would not change.
[001] - [999]
f
Factory setting: [001]
[COUNTER RESET] Resets the counter value when [USER CLIP NAME] is set to [TYPE2].
[PROPERTY] Checks loaded metadata. This cannot be modified.
[AUDIO SETTINGS]
Sets the audio recording function.
Item Description of settings
[AUDIO RECORD] Sets if the recording and output of the audio of the camera is to be performed or not.
[ON], [OFF]
f
Factory setting: [ON]
[AUDIO INPUT] [INPUT 3 LINE/MIC SEL] Sets the audio input signal from the device connected to the <INPUT 3> terminal.
[LINE]: Sets this when an audio device is connected to the line input.
[MIC]: Sets this when connected to an external microphone.
f
Factory setting: [LINE]
[INPUT 4 LINE/MIC SEL] Sets the audio input signal from the device connected to the <INPUT 4> terminal.
[LINE]: Sets this when an audio device is connected to the line input.
[MIC]: Sets this when connected to an external microphone.
f
Factory setting: [LINE]
[INPUT 1/2 MIC
POWER]
Switches the enable/disable of the phantom power supply of the external microphone connected to the
<INPUT 1/2> terminal.
[ON], [OFF]
f
Factory setting: [OFF]
[INPUT 1/2 MIC LEVEL] Sets the level of the external microphone connected to the <INPUT 1/2> terminal.
[ − 40dB]/[ − 50dB]/[ − 60dB]
f
Factory setting: [ − 40dB]
[INPUT3 MIC POWER] Switches the enable/disable of the phantom power supply of the external microphone connected to the
<INPUT 3> terminal.
[ON], [OFF]
f
Factory setting: [OFF]