Panasonic VARICAM LT, Operating Manual

Page: 110 / 182

– 110 –
Chapter 10 Menu Operations — Menu list
Menu list
[SYSTEM SETTINGS]
Sets the system in general.
Item Description of settings
[SYSTEM MODE] [FREQUENCY] Sets the system frequency.
If the setting of this item is changed, the device must be restarted. If a restart is required, a confirmation
dialog will be shown.
The system operation of the camera is determined by three settings of [FREQUENCY], [MAIN PIXEL], and
[MAIN CODEC]. Confirm all three settings.
[23.98p], [24.00p], [25.00p], [29.97p], [50.00p], [59.94p], [50.00i], [59.94i]
f
Factory setting: [23.98p]
[MAIN PIXEL] Sets the main recorder’s number of recording pixels.
[4096 × 2160], [3840 × 2160], [2048 × 1080], [2048 × 1080 CROP], [1920 × 1080], [1920 × 1080 CROP]
f
Factory setting: [4096 × 2160]
[MAIN CODEC] Sets the recording codec of the main recorder. Selectable items vary depending on the [FREQUENCY]/
[MAIN PIXEL] setting.
[AVC-Intra4K 422], [AVC-Intra4K-LT], [AVC-Intra2K 444], [AVC-Intra2K 422], [AVC-Intra2K-LT],
[AVC-Intra444], [AVC-Intra422], [AVC-Intra-LT], [AVC-Intra100], [ProRes 4444], [ProRes 422 HQ]
f
Factory setting: [AVC-Intra4K 422]
[PROXY CODEC] Sets the codec of the proxy recording.
At the same time, it switches enable/disable of the proxy data recording.
[AVC-Proxy G6], [OFF]
f
Factory setting: [AVC-Proxy G6]
[PROXY SLOT] Sets the slot to record the proxy.
[MAIN & SUB], [MAIN], [SUB]
[NORMAL + Audio] cannot be recorded when the variable frame rate is enabled with [MAIN & SUB], [MAIN].
The proxy recorded in the SD memory card cannot be transferred via network.
f
Factory setting: [MAIN & SUB]
[VFR PROXY REC] Sets the operation of the sub recorder during the variable frame rate operation.
[VFR up to 60p (50p)], [NORMAL + Audio]
f
Factory setting: [VFR up to 60p]
[COLOR SETTING] [MAIN] Sets the colors of videos (entire camera system) recorded in the main recorder.
[V-Log]/[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
f
Factory setting: [V-Log]
[GRADING] Sets whether to apply the grading process.
This only enabled when [V-Log] is set in [MAIN].
[Internal]: Sets grading with the control panel.
[OFF]: Disables the grading process.
[External App]: Sets the grading using an external application.
f
Factory setting: [OFF]
[PROXY] Sets the color of video recorded as proxy.
Selectable items vary depending on the [MAIN] setting.
When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App]
[V-Log]/[GRADING]
When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF]
[V-Log]/[V-709]
When [MAIN] is set to [SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
[SCENE1]/[SCENE2]/[SCENE3]/[SCENE4]/[SCENE5]
f
Factory setting: [V-Log]
[3D LUT] Sets the grading process method when [GRADING] is set to [Internal] or [External App].
When [GRADING] is set to [Internal] or [External App]
[OFF]/[V-709]/[LOADED FILE]/[FILE SEL]
When [GRADING] is set to [OFF]
[OFF]
f
Factory setting: [OFF]
[PLAYBACK GRADING] Sets if the grading process is applied or not on the playback video.
[OFF], [ON]
f
Factory setting: [OFF]
[CDL] Sets the grading process method when [GRADING] is set to [Internal] or [External App].
When [GRADING] is set to [Internal] or [External App]
[ON], [FILE SELECT], [OFF]
When [GRADING] is set to [OFF]
[OFF]
f
Factory setting: [OFF]
[SLOPE-R] Sets the value of [SLOPE-R].
[0.5] - [2.0] (0.01 step)
f
Factory setting: [1.00]
[SLOPE-G] Sets the value of [SLOPE-G].
[0.5] - [2.0] (0.01 step)
f
Factory setting: [1.00]
[SLOPE-B] Sets the value of [SLOPE-B].
[0.5] - [2.0] (0.01 step)
f
Factory setting: [1.00]