Panasonic Varicam 35, Operating Manual

Page: 87 / 174

– 87 –
Chapter 8 Output and Screen Display — <VF SDI> output
<VF SDI> output
This output outputs the same image as the viewfinder display.
Set the output format, surround view function, and smooth mode function in [MENU]
→ [OUTPUT SETTINGS] → [VF OUT].
Set the status display in [MENU] → [OUTPUT SETTINGS] → [VF INDICATOR].
Set the marker display in [MENU] → [OUTPUT SETTINGS] → [VF MARKER].
Set the focus assist function in [MENU] → [OUTPUT SETTINGS] → [VF FOCUS ASSIST].
Set the EXPOSURE INDEX assist function in [MENU] → [OUTPUT SETTINGS] → [VF EI ASSIST].
The setting details of the status display and marker display are the same as the details for the viewfinder.
Output format list
[SYSTEM MODE] [OUTPUT SETTINGS]
→
[VF OUT] Output Format
[FREQUENCY] [VF SDI OUT FORMAT] Signal Format
[23.98p]
[29.97p]
[59.94p]
[1080P]
1920 × 1080
59.94P
4:2:2
3G*
[1080i] 1920 × 1080
59.94i
4:2:2
1.5G
[24.00p] [1080P] 1920 × 1080
60.00P
4:2:2
3G*
[1080i] 1920 × 1080
60.00i
4:2:2
1.5G
[25.00p]
[50.00p]
[1080P]
1920 × 1080
50.00P
4:2:2
3G*
[1080i] 1920 × 1080
50.00i
4:2:2
1.5G
* With 3G SDI output, LEVEL-A signal is output.