Panasonic Varicam 35, Operating Manual

Page: 74 / 174

– 74 –
Chapter 8 Output and Screen Display — SDI output
SDI output
Output format is set in [MENU] → [SYSTEM SETTINGS] → [SDI OUT].
One type of image is output from the four BNC terminals: <SDI OUT1> to <SDI OUT4>.
If the setting does not require all four terminals, there may be terminals that do not provide output. If the output format is 3G
× 2, images are output from
the <SDI OUT1> and <SDI OUT2> terminals, and are not output from the <SDI OUT3> and <SDI OUT4> terminals.
Status, markers, etc. cannot be displayed.
During playback with the sub recorder, output is muted and the screen becomes black.
Output format list
— indicates that the item is not affected by the settings.
**
P becomes the setting value of [SYSTEM MODE] → [FREQUENCY].
[SYSTEM MODE] [VFR
SW]
[SDI OUT] Output Format
[FREQUENCY] [PIXEL] [MAIN CODEC] [HIGH SPEED] [P to
PsF] [4K OUT TYPE] Signal Format
[23.98p]
[29.97p]
[4096 × 2160] [AVC-Intra4K 444]
— — —
[SQUARE] 4096 × 2160
**
P*
4:4:4
3G × 4
—
[2 SAMPLE INT]
4096 × 2160
**
P*
4:4:4
3G × 4
[AVC-Intra4K 422]
—
[OFF]
—
[SQUARE] 4096 × 2160
**
P
4:2:2
1.5G × 4
—
[2 SAMPLE INT] 4096 × 2160
**
P
4:2:2
3G ×
2
—
[ON]
—
[SQUARE] 4096 × 2160
59.94P
4:2:2
3G × 4
—
[2 SAMPLE INT]
4096 × 2160
59.94P
4:2:2
3G × 4
[AVC-Intra4K-LT] [OFF (1-60fps)] [OFF]
—
[SQUARE] 4096 × 2160
**
P
4:2:2
1.5G × 4
—
[2 SAMPLE INT] 4096 × 2160
**
P
4:2:2
3G ×
2
[ON]
—
[SQUARE] 4096 × 2160
59.94P
4:2:2
3G × 4
—
[2 SAMPLE INT]
4096 × 2160
59.94P
4:2:2
3G × 4
[ON (60-120fps)] [ON]
—
[SQUARE] 4096 × 2160
59.94P
4:2:2
3G × 4
—
[2 SAMPLE INT] 4096 × 2160
59.94P
4:2:2
3G × 4
[24.00p] [4096 × 2160] [AVC-Intra4K 444]
— — —
[SQUARE] 4096 × 2160
24.00P*
4:4:4
3G × 4
—
[2 SAMPLE INT]
4096 × 2160
24.00P*
4:4:4
3G × 4
[AVC-Intra4K 422]
—
[OFF]
—
[SQUARE] 4096 × 2160
24.00P
4:2:2
1.5G × 4
—
[2 SAMPLE INT] 4096 × 2160
24.00P
4:2:2
3G ×
2
—
[ON]
—
[SQUARE] 4096 × 2160
60.00P
4:2:2
3G × 4
—
[2 SAMPLE INT]
4096 × 2160
60.00P
4:2:2
3G × 4