Panasonic Varicam 35 Page 58 Operating Manual Download

Page: 58 / 174

– 58 –

Chapter 5 Control Panel — INFO screen

INFO screen

The INFO screen displays information about the camera.

[DIAGNOSTICS]

Displays camera statuses such as warnings.

[SWITCHES]

The switch information assigned to each USER switch is displayed as list with [MENU]

→

[SYSTEM SETTINGS]

→

[USER SWITCHES].

[VERSION]

Displays the firmware version.

[UPDATE]: Performs an update of the firmware.

[PERIPHERAL]

Displays information about peripheral devices (USB, network, etc).

[HISTORY]

Performs operations related to services.

[USB]: Enters the support mode using the USB.

[TRACE LOG]: Writes the trace log to an SD memory card.

[MEDIA]

Performs operations related to recording media such as formatting, etc.

[CPS PASSWORD]: Moves to the screen for performing CPS (Content Protection System) operations.

[FORMAT]: Moves to the screen for performing card formatting operations.

Summary of Contents for Varicam 35















































































































































































Search results

Summary of Contents for Varicam 35

Reviews:

Related manuals for Varicam 35

Brands by name

Popular brands

Panasonic Varicam 35, Operating Manual

Search results

Summary of Contents for Varicam 35

Reviews:

Related manuals for Varicam 35

Brands by name

Popular brands