Panasonic Varicam 35, Operating Manual

Page: 44 / 174

– 44 –
Chapter 4 Video Recording and Color Grading — P2 card
Card access LED P2 card status
Flashing in green slowly
Card full
There is no free space on the P2 card. Reading only is possible.
Write protect
The write-protect switch on the P2 card is at the Protect position. Reading
only is possible.
Unrecordable card
Recording is not possible by the currently set recording format since
the SD memory card, etc. is inserted. To record the card, change the
recording format or use a P2 card.
Off
Card not supported This card cannot be used on the camera. Replace the card.
Illegal format
The P2 card is not properly formatted. Reformat the card.
No card The P2 card is not inserted. The card is waiting to be recognized.
Unauthenticated card
An expressP2 memory card or microP2 memory card that cannot be
authenticated. Select [MENU] → [SYSTEM SETTINGS] → [CARDS/
MEDIA] → [CPS PASSWORD], and enter the password.
P2 card recording time
r
P2 cards supported on the camera
The optional expressP2, P2, and microP2 memory cards can be used with the camera.
@ @
NOTE
t
AJ-P2C002SG (2 GB) cards cannot be used.
t
Refer to our support desk at the following website for the latest information not included in this document.
http://pro-av.panasonic.net/
r
Main recorder
Main recording format
([MAIN CODEC])
Setting conditions
Recording time when using a 256 GB expressP2
memory card
[AVC-Intra4K 422]
[25.00p]/[29.97p]
VFR: [OFF]
Approx. 72 min
VFR: [ON], [50fps]/[60fps] Approx. 36 min
[AVC-Intra100]
[25.00p]/[29.97p]
VFR: [OFF]
Approx. 256 min
VFR: [ON], [50fps]/[60fps] Approx. 128 min
r
Sub recorder
Sub recording format
([SUB CODEC])
Setting conditions
Recording time when using a 64 GB microP2
memory card
[AVC-Intra2K 422] [25.00p]/[29.97p] Approx. 64 min
[AVC-Intra100] [25.00p]/[29.97p] Approx. 64 min
[AVC-LongG50] [25.00p]/[29.97p] Approx. 128 min
[AVC-LongG25] [25.00p]/[29.97p] Approx. 256 min
@ @
NOTE
t
Indicated capacities include management and other area, so the space available for recording is less than the values in the table above.
Dividing clips recorded on P2 cards
If a P2 card with a capacity of 8 GB or more are used with the camera, recording is automatically continued as another clip when a single continuous
recording time exceeds the following time. The thumbnail operation (display, delete, restore, etc.) for a clip on the P2 devices can be performed as a
operation for a single clip. Clips may be displayed as separate clips in nonlinear editing software and on a computer. When using an expressP2 card in
AVC-Intra 4K 422, and if the recording is performed on a microP2 memory card that exceeds 32 GB in AVC-LongG 50 or AVC-LongG 25, the recording
can be continued as a same clip by selecting [ONE FILE] from [MENU]
→ [REC SETTINGS] → [FILE SPLIT].
Recording format (excluding native recording) Continuous recording time
AVC-Intra 4K 422 (25P/29.97P) Approx. 1 min
AVC-Intra 100 (1080/50P, 1080/59.94P) Approx. 3 min
AVC-Intra 100 (1080/25P, 1080/29.97P) Approx. 5 min
AVC-LongG 50 Approx. 10 min
AVC-LongG 25 Approx. 20 min
CPS (Content Protection System)
The expressP2 memory card (excluding B series) and the microP2 memory card support the security function “Content Protection System” that allows
encryption formatting to prevent data leakage to third party.
To use the CPS function, set a CPS password for the camera, and enable the expressP2 or microP2 memory card authentication and encryption
formatting functions. Encrypted memory cards will be automatically recognized between devices where the same CPS password is set, and recording
and playback of the memory cards will be enabled. For details, refer to “Setting CPS password” (page 45).