Panasonic Varicam 35, Operating Manual

Page: 40 / 174

– 40 –
Chapter 4 Video Recording and Color Grading — In-camera grading
In-camera grading
This chapter describes the camera’s grading function. You can record V-Log (master video) in the main recorder and grading video in the sub recorder
simultaneously.
Grading function
[CDL]:
f
Controlled using [Slope], [Offset], [Power] (RGB stand-alone), and [Saturation] (RGB common).
f
Can be controlled in real-time using the camera’s control panel.
f
Control parameters are saved to a file and stored in a P2 card together with videos, etc.
It can also be saved to the SD memory card.
f
The file extension is .cdl.
[3D LUT]:
f
Controlled in a 17-grid [3D LUT] file.
f
Uploads data within the camera through an SD memory card.
It can also be saved to the SD memory card.
f
Control parameters are saved to a file and stored in a P2 card together with videos, etc.
f
The file extension is .vlt.
Control combinations through settings
[MAIN COLOR] [Grading SEL] [SUB COLOR] [3D LUT] [CDL]
Output Picture Adjustment
[MON 1]
[MON 2]
[EVF] [VF SDI]
[V-Log]
[External App]/
[Internal]
[V-Log]
[OFF]/[V-709]/
[Loaded File]
[ON]/[OFF]
V-Log
Grading
V-Log
Grading
V-709
LCC
Same As VF/
V-Log
[Grading]
[OFF]
[V-Log]
[OFF] [OFF]
V-Log
V-709
V-Log
V-709
LCC
[V-709]
[V-709] [OFF] [V-709] [OFF] [OFF] V-709 V-709
Same As VF
[3D LUT] [OFF] [3D LUT] [OFF] [OFF] 3D LUT 3D LUT
When [MAIN COLOR] is set to [V-Log] or [3D LUT], the setting in [MENU] → [CAMERA SETTINGS] → [Enhanced] → [Enhanced SW] is fixed to [OFF].
When [Grading SEL] is set to [External App], the function is controlled from the color grading application of the computer connected via network. When
[Grading SEL] is set to [Internal], the function is controlled from the control panel.
Color grading operations can be performed using CDL even while recording is in operation. The CDL parameter value to record as the .cdl file becomes
the value when recording stops.
The control parameter recorded in the file and the control parameter applied to the video may not match when an operation for color grading is
performed right before stopping the recording.
Picture adjustment matching the settings of the output picture adjustment is output when playing the recorded V-Log video.
The .vlt and CDL parameters that is currently set in the camera is applied rather than the .vlt or .cdl that is saved at the same time as the clip to play
when set to Grading.
r
When playing back the recorded V-Log video
When outputting in output picture adjustment
f
Select [OFF] in [MENU] → [SYSTEM SETTINGS] → [COLOR SETTING] → [PLAYBACK GRADING].
f
This is reflected to the output with [MON 1]/[MON 2]/[VF]/[VF SDI] setting is set to [Grading].
When outputting with the control parameter recorded in the P2 card
f
Select [ON] in [MENU] → [SYSTEM SETTINGS] → [COLOR SETTING] → [PLAYBACK GRADING].
f
This is reflected to all output regardless of [MON 1]/[MON 2]/[VF]/[VF SDI] setting.