Panasonic UltraHD DP-UB391, Operating Instructions Manual

Page: 9 / 44

Getting started
- 9 -
∫
Front
1 Disc tray
2 USB port ( DC 5 V 500 mA)
This port supports USB 2.0 High Speed.
3 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20
e
up and down, 30
e
left and
right
4 POWER LED
When the unit is turned on, the LED flashes
first, and then lights up.
If the LED keeps flashing, there may be an
error. (
> 38)
5 Open or close the disc tray
6 Standby/on switch (
Í
/I ) ( > 17)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
∫
Rear
1 AC IN ( ) terminal ( > 10)
2 Cooling fan
3 HDMI AUDIO OUT terminal ( > 11)
4 HDMI VIDEO OUT terminal ( > 10)
5 LAN port ( > 16)
6 DIGITAL AUDIO OUT terminal
(OPTICAL terminal) (
> 12)
1 3 4 2
5 6
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
≥
When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
3 1 2 4 5 6
Class II equipment (The construction of the product is
double-insulated.)