Panasonic UF-6300, Service Manual

Page: 33 / 274

33
2.2.4. Transmit Guide (301) Assembly, Scanning Glass (308)
(7) Remove 5 Screws (19).
(8) Remove the Control Panel Chassis Assembly , and
Front Panel .
Note:
If noise occurs while scanning, clean the Roller Shaft
2 (235), and the Feed Pinch Roller (236) shaft hole
with isopropyl alcohol.
(9) Remove 15 Screws (19).
(10) Disconnect Connector CN50 on the PNL1 PC
Board .
(11) Release 2 Latch Hook .
(12) Remove the PNL1 PC Board (1004).
(1) Remove the Left Cover (103), Right Cover (102),
and Front Cover (104) (Refer to 2.2.2.).
(2) Remove the Control Panel Unit (Refer to 2.2.3.).
(3) Release the Harnesses from the clamps.
(4) Remove 4
Screws (19).
(5) Disconnect 4 Connectors ( CN1, 3, 5 , and 7 ) on the
SC PC Board .
(6) Remove the Transmit Guide (301) Assembly .
(7) Carefully release the Latch Hook using a Blade-tip
Screwdriver.
(8) Remove the Scanning Glass (308).
(4) x 4
(6)
(5)
(3)
(7)
(8)