77
UF-5500 / 4500
8 Installation Instructions
8.1.
Installation
8.1.1.
Installation Space
The space required to install the unit is shown below.
The dimensions given are necessary for the unit to operate efficiently.
Note:
• Avoid excessive heat or humidity.
• Use the unit within the following ranges of temperature and humidity.
• Ambient temperature: 50
°
F (10
°
C) to 90.5
°
F (32.5
°
C)
• Relative humidity: 20% to 80% (without condensation)
• Power cord length should be less than 5 meters. Using a longer cord may reduce the voltage or cause malfunctions.
• Avoid direct sunlight.
• Do not install near devices which contain magnets or generate magnetic fields.
• Do not subject the unit to strong physical shock or vibration.
• Keep the unit clean. Dust accumulation can prevent the unit from functioning properly.
• To protect the unit from damage, hold both sides when you move it.
• Do not place the unit in an area where the paper tray may be obstructed (i.e., by a wall, etc.)
• Keep this surface (1) away from walls etc. more than 50 mm to let the unit cool down.
457mm
522mm
7.5mm
5mm
420mm
10mm
297mm
327mm
Summary of Contents for UF-5500
