Panasonic UF-4500, Operating Instructions Manual, Page: 38 / 200

Customizing Your Machine
38
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST 1 NORMAL Setting the home position of the CONTRAST key.
2 LIGHTER
3 DARKER
02 RESOLUTION 1 STANDARD Setting the home position for the RESOLUTION.
2 FINE
3 S-FINE
4 HALFTONE
05 MEMORY (HOME) 1 OFF Setting the home position for memory transmission mode.
(This setting can be temporarily changed by using F8-9
(MEMORY XMT))
2 ON
06 DIALING METHOD 1 PULSE Selecting the dialing method.
2 TONE
07 HEADER PRINT 1 INSIDE Selecting the printing position of the header.
INSIDE : Inside TX copy area.
OUTSIDE : Outside TX copy area.
NO PRINT : Header is not printed.
2 OUTSIDE
3 NO PRINT
08 HEADER FORMAT 1 LOGO, ID
NO.
Selecting the header format.
2 FROM TO
09 RCV'D TIME PRT 1 INVALID Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received page.
2 VALID
10 KEY/BUZZER VOL. 1 OFF Selecting the volume of the Key/Buzzer tone.
2 SOFT
3 LOUD
11 RCV JOURNAL 1 OFF Setting whether the machine (automatically) prints out on
individual transaction journal on each reception.
2 ON
12 COMM. JOURNAL 1 OFF Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
OFF : Does not print
ALWAYS : Always prints
INC. ONLY: Prints only when communication has failed.
2 ALWAYS
3 INC. ONLY
13 AUTO JRNL PRINT 1 INVALID Selecting whether the machine prints the journal
automatically after every 32 transactions.
2 VALID
17 RECEIVE MODE 1 TEL Setting the receive mode.
2 FAX
3 FAX/TEL
SW.
4 TAM/FAX