26
User Parameters
Your facsimile machine has several basic settings (User Parameters) to help you keep records of the
documents you send or receive. For example, the built-in clock keeps the current date and time, and your
LOGO and ID number help to identify you when you send or receive documents.
At standby the display will show the date and time. Once the standby display is set, it will automatically be updated.
NOTE
1. The clock may occasionally require adjustment. (Lunar inequality : ±1 minute)
2. The clock of your machine is equipped with D.S.T. (Daylight Saving Time) system. (Set the
Daylight Time according to your local regulation.)
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT
TIME) to "OFF" . (See page 39)
3. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of this Operating Instructions)
General Description
Setting the Date and Time
1
SET MODE (1-8)
ENTER NO. OR
∨∧
2
USER PARAMETERS?
PRESS SET
3
KEY OPERATOR ID
ENTER ID=
4
Enter the Key Operator Password.
KEY OPERATOR ID
ENTER ID=******
5
DATE & TIME
1-01-2011 00:00
6
Enter the new date and time.
Ex:
Month: August
Date: 12th
Year: 2011
Time: 3:00 PM
If you made a mistake, use
or
to move the cursor over
the incorrect number, then overwrite it with the correct one.
DATE & TIME
8-12-2011 15:00
7
7
1
0
8
1
2
2
0
1
1
1
5
0
0
